RADIUS with AM Configuration - WALLIX Bastion RSA Ready SecurID Access Implementation Guide

Document created by RSA Information Design and Development on Apr 1, 2019
Version 1Show Document
  • View in full screen mode

This section contains instructions on how to integrate WALLIX Bastion with RSA Authentication Manager using RADIUS.

Architecture Diagram

RSA Authentication Manager

To configure your RSA Authentication Manager for use with a RADIUS Agent, you must configure a RADIUS client and a corresponding agent host record in the Authentication Manager Security Console.

The relationship of agent host record to RADIUS client in the Authentication Manager can 1 to 1, 1 to many or 1 to all (global).

RSA Authentication Manager listens on ports UDP 1645 and UDP 1812.

 

WALLIX Bastion

Follow the steps in this section to configure WALLIX Bastion as a RADIUS client to RSA Authentication Manager.

Procedure

1. Sign in to Wallix Bastion Administrative user interface and browse to Configuration > External Authentication and click to add a new RADIUS server.

2. Configure the RADIUS server settings and click Apply.

  • Authentication Name: Enter a descriptive name for the RSA Authentication Manager.
  • Server: Enter the hostname or IP address of the primary RSA Authentication Manager server.
  • Port: Enter 1812 or 1645.
  • Secret: Enter the RADIUS shared secret to match as specified in the RSA AM Security Console.

3. Repeat steps 1-2 for AM replica servers.

 

Next Step: Proceed to the Use Case section for information on how to apply the RADIUS configuration to the use case.

 

Attachments

    Outcomes