Microsoft NPS 2019 - Configure RADIUS Client Configuration - RSA Ready SecurID Access Implementation Guide

Document created by RSA Information Design and Development Employee on Jul 9, 2020
Version 1Show Document
  • View in full screen mode

Follow the instruction steps in this section to apply your RADIUS configuration to Microsoft NPS RADIUS Client.

 

Before you begin: Configure the integration type that your use case will employ. Refer to the Integration Configuration Summary section for more information.

Procedure

1. On the NPS console, expand the RADIUS Clients and Servers folder, right-click RADIUS Clients, click New.

2. In New RADIUS Client, in Friendly name, enter a display name for the RADIUS client. For Address (IP or DNS), enter the IP address of the client (Network Access Server). For Shared secret and Confirm shared secret, enter the same shared secret used for adding RADIUS client in the RSA Authentication Manager or RSA Cloud Administration Console and click OK.

 

Configuration is complete.

 

Return to the main page for more certification related information.

 
You are here
Microsoft NPS 2019 - Configure RADIUS Client Configuration - RSA Ready SecurID Access Implementation Guide

Attachments

    Outcomes