This chart provides key information about the AFX fulfillment and how many hours this has saved the business. The chart uses data found in: avuser.PV_TELEMETRY_DATA. This means the data is always 1 day behind. This data also uses values that have been pre-defined and is covered by the info found here: RSA IGL Recipes : Dashboard - ROI AFX
The goal of this chart is to understand the ROI because of AFX in hours.
The chart can be used by admins to help understand the total hours that AFX is saving the business.
Optional Changes to Dynamic Chart Values
This is how you can configure the chart, so it is useful for how you wish to view the data
- GROUPING: This allows you to group the data and display it based on the following date ranges. For example, you might want to show the data grouped per week, per quarter or per day. This will be up to you and your business needs.
For this chart, the recommendation is to use 'Monthly'You MUST ensure you use a single quote ', either side of the value, for this to work properly in the RSA IGL Chart UI.Please copy and paste these values exactly as shown below to change the chart:
However, when testing this in SQL Developer, the single quote ' is NOT required.
- TotalDataPoints: This is how many results you want to display. It is a number and doesn't need any quotes. If you set this value to be 7, it would show 7 results. For example if you set "Grouping" to be 'Monthly' then you might want to set "TotalDataPoints" = 6, showing you the results for the past 6 months.
For this chart, the recommendation is to use 6, however it will depending on the screen size you have and how this looks.
We strongly recommend you do not specify too many values for "TotalDataPoints" otherwise it will not display well
First test this in your query tool (SQLDeveloper, Toad etc..)
NVL(tFulfilmentRequestsCompleted.value * t1.dashboard_afx_time, 0) AS "Saving per Week (Hours)"
TO_CHAR(Tdates.dates, DECODE(trim( :GROUPING ) , 'Daily', 'YYYY-Mon-DD', 'Weekly', 'YYYY - "Week "WW', 'Monthly', 'YYYY - Month', 'Quarterly', 'YYYY - "Q"Q', 'Yearly', 'YYYY')) StartTime,
Use count(t1.value) to count the number of rows based on your filters
Use max(t1.value) to get the maximum value on the specific date
Use sum(t1.value) to get the collective total of values on the specific date
nvl(sum(td.value), 0) VALUE
/* if using avuser.PV_TELEMETRY_DATA then change sysdate to be sysdate-1. This is beacuse telemetry is calculated 1 day later */
WHEN :GROUPING = 'Daily' THEN trunc(sysdate-1, 'DD') - (LEVEL-1)
WHEN :GROUPING = 'Weekly' THEN trunc(sysdate-1, 'D') - (7 * (LEVEL-1))
WHEN :GROUPING = 'Monthly' THEN ADD_MONTHS(trunc(sysdate-1, 'MM'),-1 *(LEVEL-1))
WHEN :GROUPING = 'Quarterly' THEN ADD_MONTHS(trunc(sysdate-1, 'Q'),-3 *(LEVEL-1))
WHEN :GROUPING = 'Yearly' THEN ADD_MONTHS(trunc(sysdate-1, 'Y'),-12 *(LEVEL-1))
LEVEL <= :TotalDataPoints
LEFT JOIN avuser.PV_TELEMETRY_DATA td
on td.CATEGORY = 'afx'
AND td.NAME =('fulfillmentrequests.completed.today')
Use = to get values at the exact dates.
Use <= to get values on or before the exact date
AND trunc(td."DAY", DECODE(:GROUPING ,'Daily','DD','Weekly','D','Monthly','MM','Quarterly','Q','Yearly','Y')) = Tdates.dates
GROUP BY Tdates.dates
ORDER BY Tdates.dates ASC
max(value) as dashboard_afx_time
where parameter = 'custom.dashboard_afx_time'
Example of the results:
WHen you implement this chart, you may see an error as follows, however in this case, you can just "ok" the message and ignore it.
- Log into RSA IGL as a user who can create charts. In my example, im using AveksaAdmin
- Go to "Reports" / "Charts"
- Select "+ Create Chart" button
- Under the "General Tab" add the following details:
- Name: Telemetry Chart - AFX ROI Metrics - Hours
- Description: From RSA IGL Link Community. This chart provides information on the total hours saved from AFX fulfillment. This chart uses data from avuser.PV_TELEMETRY_DATA which is collected nightly, so the data is always 1 day behind.
- Type = Single Series Chart
- Under the "Query" Tab, copy the SQL from above
- Update the 2 dynamic values as noted above, recommendation:
- Press the "Preview" button, you should see some results, as per the example image below.If you get an error at this stage, please test your SQL in a Query tool, like "SQL Developer" or "SQL Squirrel" to ensure it works first.
If it still doesn't work, please share your SQL and a screen shot of the issue below. DO NOT contact RSA Support
- Under the "Columns" Tab, please use the configuration shown in the image below.
- Under the "Display Attributes" tab, you should select "Column 2D". Please also apply these settings, however you can update the wording with what is best for you.
- Under Number Formatting
- Under "Title and Axis Names"
- Under "Functional attributes"
- Select "Animation" = ticked
- Select "Show Labels" = ticked
- Select "Show Values" = ticked
There are MANY other "display attributes" you can play with on this screen, so please update and make changes as you see fit.
- Please "hit reply" and share your feedback - we would love to see an image of this working in your environment!
- Check out the other content found on the RSA IGL Recipes page: RSA Identity Governance & Lifecycle Recipes