|Applies To||RSA Product Set: RSA Certificate Manager|
RSA Registration Manager
RSA Certificate Manager API
RSA Key Recovery Manager
RSA Validation Manager
nCipher / Thales Hardware Security Modules (HSMs)
|Issue||List of nCipher software versions qualified with DCS products.|
What versions of nCipher software have been qualified with Digital Certificates Solution (DCS) products?
|Resolution||Due to independent release schedules for the RSA DCS products versus the nCipher / Thales software and HSMs, not all version combinations can be qualified. When a new / latest nCipher software version is tested by RSA (or RSA and Thales), the qualified version information is documented in either RSA DCS product release notes (available on RSA Link) and/or in the RSA Partner Engineering implementation guides (available on RSA Ready Community).|
Here's a list of nCipher software versions qualified with DCS products (the list is updated as needed):
|Notes||CERTMGR-3672: nCipher software v 11.x and later installed on Windows platform under the following default folders causes problems with RCM installation:|
C:\Documents and Settings\All Users\Application Data\nCipher
For a workaround, refer to solution 000013855 - RSA Certificate Manager installation fails with error "XrcNOTFOUND: unable to locate requested member or object" when selecting SSL Keys based on nCipher software version 11.11.
CMAPI-193: RCM-API 6.9 build 556 and later on Windows for VS6.0 platform is built with nCipher Development Library v10.50. Other RCM-API libraries for Windows platforms VS 2005 and VS 2008 are built with nCipher Development Library v11.62.
|Legacy Article ID||a67416|