The Navigate view displays the activity and values for the selected service in accordance with the Investigation options in the Options panel: profile, time range, meta group, and query. As analysts investigate events of interest, the meta keys and values are displayed.
To access the Navigate view, select Investigation > Navigate in the Security Analytics menu. When a service investigation is open, the view is similar to the figure below.
The Navigate view consists of these features:
- Pause/reload button and breadcrumb
- Time banner
- Optional debug information.
- Collapsible Visualization panel
- Values panel
- Context Lookup panel
The toolbar provides a way to:
- Change the service being investigated.
- Control the range of data displayed: You can select use profiles, set a time range, use meta groups, and create queries to apply to the data.
- Set the quantification method and sorting method for data in the Values panel.
- Perform actions on the results. You can export and print results, navigate to an event for which you have an event ID, and pass a query to Informer.
- Configure Investigation settings without navigating away from the Investigation views.
Some of the toolbar options are labeled with the default value or the selected value rather than displaying the name of the option. For example, the time range option in the example above is labeled All Data to reflect the currently selected value. These are the tool bar options.
|Displays the selected service name next to the icon. Clicking the icon opens the Investigate a Service dialog, in which you can select a service to investigate and set the default service to investigate (see Begin an Investigation of a Service or Collection). Changing the service does not cause a reload of the data.|
Displays the Time Range options; the currently selected option is displayed in the toolbar (see Set the Time Range for an Investigation). Possible choices are:
Note: If you specify custom start or end times in seconds, the value for start time in seconds always defaults to :00, and the value for end time in seconds always defaults to :59. For example, if you are using time to drill down into an issue, the drill time will be interpreted as HH:MM:00 - HH:MM:59. Seconds display in this format in Investigation > Navigate functions.
Displays the Query dialog, in which you can enter a custom query directly instead of drilling down the data. See Investigation - Query Dialog for a description of the dialog.
|Profile||Displays the Profile menu; the currently selected profile is displayed in the toolbar. A profile allows you to manage and use profiles that can include custom meta groups, a default column group, and a beginning query. The Profiles apply to the Navigate view (meta groups and queries) and the Events view (column groups and queries). See Use Investigation Profiles to Encapsulate Custom Views for more information.|
|Meta||Displays the Meta Group menu. You can use Default Meta Keys or a custom Meta Group. You also have the option to make changes to both group types (see Manage User-Defined Meta Groups).|
|Sort Field||Displays the Sort Field menu; the currently selected option is displayed in the toolbar. The menu has two options: Order by Total and Order by Value. The Sort Field is a complement to the Sort Order option; the data for each meta key is ordered based on the total (green number) or the meta value (blue text) (see Set Quantification Method and Sort Sequence of Meta Key Results).|
Displays the Sort Order menu; the currently selected option is displayed in the toolbar. The menu has two options: Sort in Ascending Order and Sort in Descending. The Sort Order is a complement to the Sort Field option; the selected field for each meta key is ordered in ascending or descending order (see Set Quantification Method and Sort Sequence of Meta Key Results)).
Displays the Quantification Method menu; the currently selected option is displayed in the toolbar. The drop-down menu contains three options for calculating the quantity (green number in parentheses) for a meta value: Quantify by Event Count, Quantify by Event Size, and Quantify by Packet Count (see Set Quantification Method and Sort Sequence of Meta Key Results)).
These are applied differently depending on the type of data in view.
For packet data:
For log data:
The Actions menu includes various actions (Visualize, Go To Event, and Print) that you can perform in the Navigate view (see Act on a Drill Point in the Navigate View).
|Save Events||Displays the Save Events menu, in which you can use options to: extract files associated with an event, export the current drill point as a PCAP file, and export the current drill point as a log file (see Export a Drill Point).|
Enables you to search for text patterns within the current set of events. If you click in the Search field, it shows a drop-down menu with search options. If you click Apply, it saves the selected options and also updates the search options in the Events view and the Investigations profile (see Investigation - Search Options).
|Settings||Displays the Investigation settings for the Navigate view (which are also editable in the Profile view) so that you can change Investigation settings without navigating away from the Navigate view. When you change a setting In the Navigate view the setting is also changed in the Profile view (see Configure Navigate View and Events View).|
Pause/Reload Button and Breadcrumb
The breadcrumb tracks each query as you drill down through the metadata for the service. Each query is listed with a drop-down menu in a pipe separated string. The last point is the current point, also called the tip. The icon in front of the breadcrumb allows you to pause the loading of meta values and to reload meta values.
The breadcrumb does not include the service name and appears only if a query is in effect. If too many drill points exist for display, the overflow is shown as double angle brackets, >>, at the end of the breadcrumb.
Each drop-down menu in the breadcrumb is the same, with slight variation based on the position of the crumb.
The following table describes the controls and menu options in the breadcrumb.
|Pause and Reload button. Controls the loading of data in the view. It has three possible functions: pause loading, continue loading, and reload.|
|Navigate Here||Opens the selected drill point in the current Values panel.|
|Navigate Here (new tab)||Opens the selected drill point in a new tab.|
|Insert Before||Inserts a query before the current drill point. The Create Filter dialog opens and you can define a custom query to insert in the breadcrumb (see Create a Custom Query).|
Appends a query after the current drill point. The Create Filter dialog opens and you can define a custom query to append to the end of the breadcrumb (see Create a Custom Query).
|Remove||Removes the selected drill point from the breadcrumb.|
Opens the selected drill point in the Create Filter dialog so that you can edit the query.
Clicking the angle brackets displays a drop-down menu of the breadcrumb overflow.
(Optional) Debug Information
If you have activated the Show Debug Information setting and the service you are navigating is a 10.4 or later Broker, Security Analytics displays the debug information beneath the breadcrumb.
The debug information is the where clause from the current query. The only time there is no where clause is when the time range is all data and there are no drill points. If the Broker has at least one aggregate service that is offline, the debug information also lists the offline service.
(attachment exists)&&(tcp.dstport = '80')&&(risk.info exists)$$time='2014-05-04 18:50:00"-"2014-05-09 18:59:59(attachment exists) && (tcp.dstport = '80') && (risk.info exists) && time="2014-05-04 18:50:00"-"2014-05-09 18:50:59"
In addition, the time taken to load is displayed at the end of each meta key in the Values panel.
Just below the breadcrumb and debug information (if present), the time banner shows the time range used to create the chart.
At the top of the Navigate view is a visualization of the current drill point. You can use this to drill into data from the Visualization panel (see Drill into Data in the Navigate View Time Chart). You can show or hide the visualization, and choose one of the the visualization options: Timeline or Coordinates. The Visualization opens initially to the last saved Visualization.
The timeline displays activity for the specified service and time range, as a line chart or a bar chart based on your choice in the Options menu. The second figure illustrates a line chart and third figure illustrates a bar chart.
|Number of Events (Timeline)|
The Y axis of the chart based on thousands of events.
|Time Line (Timeline)|
The X axis of the chart based on the time the events occurred.
|Event point (Timeline)||If you want to explore a specific section, simply select the range from the chart. The new time range will be reflected in the chart.|
|Investigate (Timeline)||Displays the meta values for the selected subset.|
Reset Zoom (Timeline)
To return to the original time range, click Reset Zoom.
|Options||Displays the Visualization Options dialog. Data points can be displayed as a Line chart (default), a Bar chart, or Coordinates chart. When a chart type is select, the relevant options are displayed.|
Collapses the chart.
Parallel Coordinates Chart
The Parallel Coordinates chart is one of the choices in the Options menu for visualizing the current drill point. With Coordinates selected in the Visualization Options dialog, you can select the meta data to be displayed (see Visualize Metadata as Parallel Coordinates).
Each axis is a meta key. The number of meta keys affects the load time for the chart. All meta keys are loaded, but it there the number of events per meta key is limited.
Lines represent events and they connect values on the axes to show the correlation between multiple meta keys.
Displays the Visualization Options dialog. Data points can be displayed as a Line chart (default), a Bar chart, or Coordinates chart. When a chart type is select, the relevant options are displayed.
Only a subset of events is displayed.
This message is a notification that not all events in the values panel are drawn in the chart. Removing axes or filtering the data in the Values panel can help to display all events.
Events Found | Unique Paths
Displays the total number of events charted versus the number of unique paths charted. Setting the All Meta Keys Must Exist in an Event option redraws the chart so that it is more targeted and legible.
|DNE||Indicates that there is no values for this meta key in the event.|
In the Visualization Options dialog for Coordinates, you can select the meta keys to chart.
In the Add Keys to Parallel Coordinates Visualization dialog, you can select the meta keys or meta groups to use as axes the Parallel Coordinates visualization.
Select Keys: Two options for selecting meta keys are:
Each option offers a drop-down list from which to select.
|With the Selected Meta Keys...|
The options for the method of adding meta keys allow you to:
Closes the dialog and does not add any keys.
Closes the dialog and adds the selected keys as specified.
The major feature of the Navigate view is the Values panel, which you can use to analyze data (see Drill into Data in the Values Panel). The first figure below illustrates the Values panel in normal mode; the second figure illustrates the added information when the Show Debug Information setting is active.
The default view is for the last 3 hours of collection, using the default meta keys and non-indexed meta keys closed. The meta keys within the meta groups are displayed in the order that Security Analytics queries the keys. As the data loads into the Values panel, Security Analytics is optimized to show partial results, loading progress, and service status as the data loads.
The loading behavior is determined by several configuration settings. The highest level settings are configured by the administrator for each user. These are:
- The maximum amount of time allowed for this user to run a query (Query Timeout).
- The limit at which Security Analytics stops counting the number of meta values in a session (Session Threshold). If a threshold is set for a session, the Navigation view shows that the threshold was reached and the percentage of query time used to reach the threshold.
Note: The values for non-indexed meta keys take longer to load in the Values panel. To optimize loading, Security Analyticsdoes not open non-indexed meta keys by default. Refer to Manage and Apply Default Meta Keys in an Investigation for a detailed description of non-indexed meta keys in Investigation.
When you have launched an investigation of a service, Security Analytics displays results in the Values panel.
- Security Analytics loads meta keys and meta values in the Values panel. For each meta key load, the stages of load are:
- Waiting to Be Loaded or Closed. If Closed, no data for that key is loaded.
- Loading progress: Security Analytics is receiving and displaying progress messages.
- Partial results: Security Analytics is receiving values messages and partial results are displayed in the Values panel.
- Load Complete: All results are finished loading.
- As each meta key load is completed, and final values are displayed, the next meta key is started. The number or values rendered for each meta key is specified by the Render Threads value in the Investigation Preference settings. Loading continues until all keys to be loaded have finished.
- If Show Debug Information is active and the service you are navigating is a 10.4 or later Broker, Security Analytics displays load time information beneath the values for each meta key and displays additional load details for the aggregated services. Security Analytics also displays the debug information beneath the breadcrumb.
Iterative results provide feedback on the status of queries within the interfaces to provide additional context for how long the data load will take and if any service data is missing. For example, if you are querying a Broker that is aggregating from two Concentrators, Security Analytics starts displaying the results from the first Concentrator as soon as it is available, even if the second Concentrator is still waiting for results.
Iterative results also include a notification that service data is missing because the service is unreachable.
When partial values from the Core service are returned but not completed, a message at the end of the meta key listing shows the progress of values loaded. In the example below, Currently looking at 38 ip.src values 71% indicates that loading of values for the meta key is 71% complete.
If the Show Debug Information setting is in effect, a field at the end of the values displays the status for the different systems against which you are querying within Security Analytics. For example, when you are querying against a 10.4 broker pulling from multiple concentrators, Security Analytics displays the status of the query on each of the Concentrators, which provides insight into the relative speed of data loading from each of the Concentrators. Each service that participated in the query is listed with the total elapsed time for the query.
Each service that participated in the query is listed with the total elasped time for the query. In the example above, two services returned in 3.207 seconds, localhost:50005 took 2 seconds to return the results. In addition, the where clause of the query is displayed below the breadcrumb. You can copy this syntax directly into an application rule or Reporting where clause of a rule.
This is an example of values that have finished loading.
For each meta key, there is a list of values (blue text) and counts (green text) found in the current drill point. When you click a value to drill down into a subset of the currently selected data, the display is updated and the new drill point is recorded in the breadcrumb. You can specify the sorting and quantification methods for the values list using the option in the toolbar.
Note: Title, values, and counts for non-indexed meta keys are not drillable; the Values and counts are shown in black. Refer to Manage and Apply Default Meta Keys in an Investigation for a detailed description of non-indexed meta keys in Investigation.
Meta Key Context Menus
The Meta Keys in the Values panel have context menus. Next to each meta label, a drop-down arrow displays the options that can apply to that item. You can use these to change the way the results for the meta key are displayed in the current view. Changes made to meta keys are displayed in the current view during drill points persist until you refresh the page or select a new service in the Navigate view toolbar. Manage and Apply Default Meta Keys in an Investigation refresh reverts the current view of meta keys as defined in the Manage Default Meta Keys dialog (see Manage and Apply Default Meta Keys in an Investigation). If you have never made modifications in the Manage Default Meta Keys dialog, Security Analytics restores the default meta keys from the core service.
- More Results
- Max Results
- Hide Results
- Meta Key Info
Context Lookup Panel
With the addition of a new Context Hub service , the Navigate view has a panel on the right side called the Context Lookup panel. The Context Lookup panel is displayed only if you have installed and configured the Context Hub service. For more information on configuring the Context Hub service, see the Context Hub Configuration Guide.
The Context Lookup panel displays relevant data when an analyst looks up contextual data for a meta value in the Values panel.
After the administrator configures the Context Hub service, you can view the contextual information for the meta values in the Navigate view and the Events view. For more information on configuring the Context Hub service, see the Context Hub Configuration Guide.
For information about performing Context Lookup for meta values, see View Additional Context for a Data Point.
The Context Hub service is pre-configured with default meta type and meta key mapping. For information about the mapping of the context hub meta value with investigation meta key, see "Manage Meta Type and Meta Key Mapping" in the Context Hub Configuration Guide
You can view the type of context data that is available for a highlighted meta value by hovering the mouse over a highlighted meta value. An inline indicator shows which type of context data is available for the meta: ECAT, Incidents, Alerts, or Lists.
Right-clicking a meta value opens a menu with the context lookup option. The following figure illustrates the Context Lookup option when you right-click a meta value.
For more information about the lookup results and contextual information for different data sources, see Investigation - Context Lookup Panel.