A Log Decoder is a special type of Decoder, and is configured and managed in a similar way to a Decoder. Therefore, most of the information in this section refers to both types of Decoders. Differences for Log Decoders are noted.
To access the Services System view for a Decoder:
- In the Security Analytics menu, select Administration > Services.
The Administration Services view is displayed.
- Select a service and select > View> System.
The following figure shows an example of the Services System view for a Decoder.
The following figure shows the Services System view for a Log Decoder.
Services Info Toolbar
The following toolbars show the options specific to Decoders and Log Decoders.
In addition to the common options in the Services System View toolbar, you can start and stop capture of packets or logs. The upload file options are different for the standard Decoder (packet capture file) and the Log Decoder (log file).
|Upload Packet Capture File||Displays a dialog that provides a way to select a packet capture (.pcap) file for upload to the selected Decoder. For more information, see Upload Packet Capture File topic in Decoder and Log Decoder Configuration Guide. |
Note: This option does not apply to Log Decoders.
|Upload Log File||Displays a dialog that provides a way to select a log (.log) file for upload to the selected Log Decoder. For more information, see Upload Log File to a Log Decoder topic in Decoder and Log Decoder Configuration Guide.|
|Start/Stop Capture||Starts packet capture on the selected Decoder. When packet capture is in progress, the option in the toolbar changes to Stop Capture, and the option to upload a file is unavailable.|