Log Collection SNMP: Step 1: Configure SNMP Event Sources in Security Analytics

Document created by RSA Information Design and Development on Jul 29, 2016
Version 1Show Document
  • View in full screen mode
 

After completing this procedure, you will have...

  • Configured an SNMP event source.
  • Modified an SNMP event source.

Return to Procedures

Configure an SNMP Event Source

  1. In the Security Analytics menu, select Administration >Services.
  2. In the Services grid, select a Log Collector service.
  3. Click AdvcdExpandBtn.PNGunder Actions and select View > Config >.
  4. In the Event Sources tab, select SNMP/Config  from the drop-down menu.
    The Event Categories panel displays the SNMP event sources that are configured, if any.
  5. In the Event Categories panel toolbar, click Icon-Add.png.
    The Available Event Source Types dialog is displayed.
    AvailSNMPESType.PNG
  6. Select an event source type (for example, snmptrap) and click OK.
    The newly added event source type is displayed in the Event Categories panel.
  7. Select the new type in the Event Categories panel
    The new SNMP source dialog is displayed in the Sources panel.
    SNMPEvSrcTb.png

Modify an SNMP Event Source

  1. In the Security Analytics menu, select Administration >Services.
  2. In the Services grid, select a Log Collector service.
  3. Click AdvcdExpandBtn.PNGunder Actions and select View > Config >.
  4. In Event Sources tab, select SNMP/Config  from the drop-down menu.
  5. Select an event source type (for example, snmptrap) from the Event Categories panel and click OK.
  6. In the Source panel, select an event source and click icon-edit.png.
    The Edit Source dialog is displayed.
    SNMPEditSrc.PNG
  7. Modify the parameters that require changes and click OK.
    Security Analytics applies the parameter changes to the selected event source.

Parameters

SNMP v3 User Manager Configuration Parameters

SNMP Event Source Configuration Parameters

You are here: SNMP Collection Configuration Guide > Procedures > Log Collection SNMP: Step 1: Configure SNMP Event Sources in Security Analytics

Attachments

    Outcomes