Log Collection SNMP: Configure SNMP v3 Users

Document created by RSA Information Design and Development on Jul 29, 2016
Version 1Show Document
  • View in full screen mode
 

After completing this procedure, you will have:

  • Added an SNMP v3 user.
  • Edited an SNMP v3 user.

Return to SNMP Collection Configuration Checklist

Add an SNMP User

  1. In the Security Analytics menu, select Administration >Services.
  2. In the Services grid, select a Log Collector service.
  3. Click AdvcdExpandBtn.PNG under Actions and select View > Config >.
  4. In the Event Sources tab, select SNMP/SNMP v3User Manager from the drop-down menu.
    The SNMP v3 Users panel is displayed.
  5. Click Icon-Add.png.
    The Add SNMP User dialog is displayed.
  6. Complete the dialog and click Save.
    AddSNMPUser.png

Edit an SNMP User

  1. In the Security Analytics menu, select Administration >Services.
  2. In the Services grid, select a Log Collector service.
  3. Click AdvcdExpandBtn.PNG under Actions and select View > Config >.
  4. In the Event Sources tab, select SNMP/SNMP v3User Manager from the drop-down menu.
    The existing SNMP v3 users are displayed.
  5. Select an SNMP v3 User.
  6. Click icon-edit.png.
    The Edit SNMP dialog is displayed.
  7. Modify the parameters that require changes and click Save.
    EditSNMPUser.png

Parameters

SNMP v3 User Manager Configuration Parameters
SNMP Event Source Configuration Parameters

Attachments

    Outcomes