Management Information Base Objects for SNMP for the Hardware Appliance

Document created by RSA Information Design and Development on Jun 13, 2017Last modified by George Spagnoli on Sep 21, 2017
Version 5Show Document
  • View in full screen mode

 

RSA Authentication Manager 8.2 SP1 includes Management Information Base (MIB) files that you can use to monitor the appliance hardware. You can download the appliance MIB files from the Security Console. For more information on configuring SNMP for Authentication Manager and downloading MIB files, see Configure SNMP.

 

Authentication Manager supports hardware trap generation for SNMP v3. Authentication Manager does not support hardware trap generation through SNMPv1 or SNMPv2.

 

The hardware appliance MIB files contain MIB objects that you can use for GETS, to collect aggregate and real-time performance data for the hardware appliance. You can view these objects and their corresponding statistics in a MIB browser. To view the details of the MIB objects, you must download a MIB browser.

Dell Hardware Appliance MIB Files

The following table describes the Dell hardware appliance MIB files provided with RSA Authentication Manager 8.2 SP1.

MIB FileContents
10892.mibInformation about the systems monitored by Server Administrator instrumentation software. The 10892.mib is the primary MIB for the PowerEdge systems.
dcs3rmt.mibInformation about the remote access components monitored by the Server Administrator Remote Access Service.
dcstorag.mibInformation about the storage hardware components and RAID configurations monitored by Server Administrator.
dellrac.mibInformation related to the remote access card.
DELL-RAC-MIB.txtInformation about the components monitored by the remote access out-of-band software agent.
iDRAC-SMIv1.mibInformation about the SNMP data, and traps, supported by the iDRAC7. This MIB file is written in "SMv1" notation/format.
iDRAC-SMIv2.mibInformation about the SNMP data, and traps, supported by the iDRAC7. This MIB file is written in "SMv2" notation/format.
OME.mibDefines traps forwarded by Dell OpenManage Essentials (OME), as well as internally generated alerts based on health and power monitoring.
qlaspCfg.mib

The QLogic Advanced Server Configuration MIB defines the LoadBalance/VLAN configuration Management Information Base.

These objects are part of the enterprise MIB for QLogic Advanced Server.

qlaspStat.mib

The QLogic Advanced Server Statistics MIB defines the Load Balance/VLAN Statistics Management Information Base.

These objects are part of the enterprise MIB for Broadcom Advanced Server.

qlaspTrap.mibThe QLogic Advanced Server Trap MIB provides information about the QLogic adapter.
qlgcadptinfo.mib

The QLogic NetXtreme Network Adapter Extended Information MIB defines the QLogic NetXtreme Adapter Extended Information Set.

These objects are part of the enterprise MIB for QLogic server and workstation network adapters.

To view the contents of these files, you must download a MIB browser.

Intel Hardware Appliance MIB Files

 

The Intel hardware appliance includes two MIB files. The basebrd5_v1.mib file supports SNMP v1 or later, and the basebrd5_v2.mib file supports SNMP v2 or later. Either MIB file can be used for SNMP monitoring because Authentication Manager supports SNMP v3. Authentication Manager does not support hardware trap generation through SNMPv1 or SNMPv2.

 

Each hardware appliance MIB file supports traps and GETS for the following components:

 

  • Voltage
  • Temperature
  • System Fan (includes redundancy)
  • Memory
  • Processor
  • Power Supply (includes redundancy)
  • PCI Hot Plug Events
  • Chassis

 

The hardware appliance MIB files contain MIB objects that you can use for GETS, to collect aggregate and real-time performance data for the hardware appliance. You can view these objects and their corresponding statistics in a MIB browser. To view the details of basebrd5_v1.mib and basebrd5_v2.mib, you must download a MIB browser.

 

 

 

 

 

 

 

 

 

 

Attachments

    Outcomes