SNMP Collection: Step 1. Configure Event Sources in SA

Document created by RSA Information Design and Development on Jun 25, 2017Last modified by RSA Information Design and Development on Jul 28, 2017
Version 2Show Document
  • View in full screen mode
  

This topic tells you how to configure SNMP event sources for the Log Collector.

After completing this procedure, you will have...

  • Configured an SNMP event source.
  • Modified an SNMP event source.

Return to Procedures

Procedures

Configure an SNMP Event Source

  1. In the Security Analytics menu, select Administration > Services.
  2. In the Services grid, select a Log Collector service.
  3. Click AdvcdExpandBtn.PNGunder Actions and select View > Config >.
  4. In the Event Sources tab, select SNMP/Config from the drop-down menu.
    The Event Categories panel displays the SNMP event sources that are configured, if any.
  5. In the Event Categories panel toolbar, click Icon-Add.png.
    The Available Event Source Types dialog is displayed.
    AvailSNMPESType.PNG
  6. Select an event source type (for example, snmptrap) and click OK.
    The newly added event source type is displayed in the Event Categories panel.
  7. Select the new type in the Event Categories panel
    The new SNMP source dialog is displayed in the Sources panel.
    SNMPEvSrcTb.png

Modify an SNMP Event Source

  1. In the Security Analytics menu, select Administration > Services.
  2. In the Services grid, select a Log Collector service.
  3. Click AdvcdExpandBtn.PNGunder Actions and select View > Config >.
  4. In Event Sources tab, select SNMP/Config from the drop-down menu.
  5. Select an event source type (for example, snmptrap) from the Event Categories panel and click OK.
  6. In the Source panel, select an event source and click icon-edit.png.
    The Edit Source dialog is displayed.
    SNMPEditSrc.PNG
  7. Modify the parameters that require changes and click
    OK.
    Security Analytics applies the parameter changes to the selected event source.

Parameters

Step 1. Configure SNMP Event Sources in Security Analytics

SNMP v3 User Manager Configuration Parameters

Previous Topic:Procedures
You are here
Table of Contents > SNMP Collection Configuration Guide > Procedures > Step 1. Configure SNMP Event Sources in Security Analytics

Attachments

    Outcomes