Archiver: Step 1. Add the Archiver Service

Document created by RSA Information Design and Development on Sep 13, 2017Last modified by RSA Information Design and Development on Oct 4, 2017
Version 6Show Document
  • View in full screen mode
  

In order to add an Archiver service, ensure that you have installed an Archiver host on which you want to run the Archiver service. See the Step 1: Add or Update Host topic in the Host and Services Getting Started Guide for the procedure that explains how to add a host.

After you install an Archiver host, you need to add an Archiver service an apply a license to it, as explained in the following procedure.

Note: This procedure is only required if you do not have the Archiver service installed.

Perform the following steps to add the Archiver service:

  1. Go to ADMIN > Services.
  2. In the Services panel toolbar, select > Archiver.

    The Add Service dialog is displayed.


  3. Provide the following details.

                                            
    FieldDescription
    HostSelect a host from the drop-down menu.
    NameType a name for the service.
    PortDefault port is 50008.
    SSLSelect SSL if you want NetWitness Suite to communicate with the service using SSL. The security of data transmission is managed by encrypting information and providing authentication with SSL certificates.

    Note: If you select SSL, ensure SSL is enabled in the System Configuration panel.

    Username(Optional) Type the username for the service.
    Password(Optional) Type the password for the service.
    Entitle ServiceSelect if you want to apply the entitlements currently configured to this service. For more information, see the Entitlement Capability Implementation topic in the Licensing Guide.
  4. Click Test Connection to determine if NetWitness Suite connects to the service.
  5. When the result is successful, click Save.

    The added service is now displayed in the services panel.

    Note: If the test is unsuccessful, edit the service information and retry.

  6. Apply license to the Archiver service.

    Refer to the Synchronize NetWitness Server topic in the Licensing Guide for details on the procedure to activate (apply a license to) the Archiver service.

You are here
Table of Contents > Basic Archiver Configuration > Step 1. Add the Archiver Service

Attachments

    Outcomes