NW Cfg: NTP Settings Panel

Document created by RSA Information Design and Development on Sep 14, 2017Last modified by RSA Information Design and Development on Apr 11, 2019
Version 14Show Document
  • View in full screen mode

NTP setting panel is a protocol designed to synchronize the host machine clocks over a network. For more information on NTP see the home page (http://www.ntp.org/).

Note: NetWitness Platform core hosts must be able to communicate with the NetWitness Server host with UDP port 123 for NTP time synchronization. 

You use the ADMIN > System NTP Settings view to configure one or more NTP servers. After you configure an NTP server, NetWitness Platform uses NTP to synchronize the host machine clocks. You configure multiple NTP servers for Fail Over purposes.


NTP settings workflow

What you need to do?

Role I want to ...Show me how
AdministratorAdd or Modify an NTP ServerConfigure NTP Servers

Related Topics

Quick Look

The following example illustrates an NTP setting panel. The panel defines how to add NTP server to NTP setting panel.

NTP settings panel

1Displays the NTP setting panel.
2Enter the NTP Server IP Address or hostname.

Click on an existing hostname.


The following table describes the settings in the NTP Settings panel.

Add Enter the NTP Server IP Address or hostname to add the NTP server to NetWitness Platform.
Delete the selected NTP server.
Synchronizes the selected NTP server.
Selects the NTP server that you want to delete or synchronize.
NTP Server

NTP Server IP Address or hostname. If you click on an existing  hostname, NetWitness Platform makes the hostname editable and displays the following command buttons:

  • Update - Applies your edits.
  • Cancel - Cancels your edits.
Apply Applies the NTP server settings and synchronizes host machine clocks to NTP.

You are here
Table of Contents > References > NTP Settings Panel