This article describes how to integrate OneLogin with RSA Cloud Authentication Service using RADIUS.

    
Configure RSA Cloud Authentication Service

Perform these steps to configure RSA Cloud Authentication Service using RADIUS.
Procedure

1. Sign in to Cloud Administration Console and click Authentication Clients > RADIUS > Add RADIUS Client and Profiles.
   
2. Enter the Name, IP Address, and Shared Secret.
3. Click Save and Next Step. Cloud Authentication Service validates the password and applies the access policy for additional authentication option.
   
4. Configure RADIUS Profiles and click Finish.
   
5. Click Publish Changes to push your configuration change to the RADIUS server.
   
   

Configure OneLogin

Perform these steps to configure OneLogin.
Procedure

1. Log in to OneLogin as an administrator and navigate to Security > Authentication Factors.
2. Click New Auth Factor and select RSA SecurID. 
   
3. Enter the RADIUS hostname, port number, and shared secret for your RSA Authentication Manager server. Note that OneLogin must be able to reach the server on the port you specify, which may require you to change your firewall configuration. Traffic from OneLogin always originates from the IP addresses 184.106.14.98 and 72.3.150.221.
   
4. Click Save.

The configuration is complete.

Return to OneLogin - RSA Ready Implementation Guide.