• With physical access to the console, note the Dell Service Tag on the server and use the link above to get the required information.

• If there is no physical access to the appliance, SSH to the appliance.  
• If there is physical access to the console, connect a monitor, USB mouse and keyboard to the appliance.
• If using the 2U/A250 version of the RSA SecurID Appliance and the Dell Remote Access Controller (DRAC) has been properly configured, this can also be used to get command-line access.  

For the RSA SecurID Appliance 3.0 running on a 1U/A130 server

• The PowerEdge R200 cannot be upgraded to Authentication Manager 8.1.  Please contact your RSA sales rep to discuss purchasing new hardware or consider deploying Authentication Manager 8.1 as a virtual server.
• The PowerEdge R210 can be upgraded to Authentication Manager 8.1.  Documentation for the upgrade can be found in the RSA Authentication Manager 7.1 to 8.1 Migration Guide.  The software is available from the RSA Authentication Manager 8.1 download page.

For the RSA SecurID Appliance 3.0 running on a 2U/A250 server

• The PowerEdge R2950 cannot be upgraded to Authentication Manager 8.1.  Please contact your RSA sales rep to discuss purchasing new hardware or consider deploying Authentication Manager 8.1 as a virtual server.
• The PowerEdge R710 can be upgraded to Authentication Manager 8.1.  Documentation for the upgrade can be found in the RSA Authentication Manager 7.1 to 8.1 Migration Guide.  The software is available from the RSA Authentication Manager 8.1 download page.

Login as: emcsrv
emcsrv@hostname.company.com's password:   <enter the OS user password>
Last login: Tue May 20 08:53:40 2014 from 10.20.30.40
-bash-3.00$ omreport chassis info
Chassis Information

Index                                    : 0
Chassis Name                             : Main System Chassis
Host Name                                : hostname.company.com
BMC Version                              : 1.79
Chassis Model                            : PowerEdge R200
Chassis Lock                             : Present
Chassis Service Tag                      : 14HKTJ1
Chassis Asset Tag                        :
Flash chassis identify LED state         : Off
Flash chassis identify LED timeout value : 300
-bash-3.00$

login as: rsaadmin
Using keyboard-interactive authentication.
Password:  <enter OS user password>
Last login: Thu Aug 20 13:05:57 2015 from 192.168.2.102
RSA Authentication Manager Installation Directory: /opt/rsa/am
rsaadmin@am81p:~> sudo su
rsaadmin's password:   <enter OS user password again>
am81p:/home/rsaadmin # dmidecode | grep Manufacturer

Manufacturer: Dell Inc.      
Manufacturer: VMWare, Inc.    
Manufacturer: EMC          
Manufacturer: Intel          

• The RSA SecurID Appliance 3.0 on an A130 server was shipped with 4 GB of RAM. The new A130 server with Authentication Manager 8.1 ships with 8 GB of RAM. 
• The RSA SecurID Appliance 3.0 on an A250 server was shipped with 8 GB of RAM, but the 32-bit rPath Linux OS could only access 4 GB of RAM.  The  Authentication Manager 8.1 upgrade uses 64-bit SUSE Linux and can access all 8 GB. The new A250 server with Authentication Manager 8.1 is shipped with 16 GB of RAM. 
• Some of the hardware appliances running Authentication Manager 8.1 are shipped in certain geographical areas with non-Dell-brand hardware. These servers are already running Authentication Manager 8.1 or higher, so upgrading them to Authentication Manager 8.1 is not relevant.