Changing Internal IP address on the Crossovers in a LogSmart Environment
Originally Published: 2007-09-13
Last Modified: 2023-11-30
Article Number
Applies To
crossover IP
internal IP
Issue
Resolution
1. Change Network interfaces configuration on both ends of all cross-over interfaces.
2. Modify the crossover address in the c:\WINDOWS\system32\drivers\etc\lsconfigurationwizard.cfg (or c:\WINNT\system32\drivers\etc\lsconfigurationwizard.cfg) file.
To change internal IP addresses on the crossovers in an LS series appliance site after the initial install (after running the enVision Configuration Wizard):
1. Change network interfaces configurations on both ends of all cross- over interfaces between D-SRV and the A-SRV (or LC).
2. Modify the crossover address in the c:\WINDOWS\system32\drivers\etc\lsconfigurationwizard.cfg (or c:\WINNT\system32\drivers\etc\lsconfigurationwizard.cfg) file.
3. Change NTP server configuration on A-SRV (LC) servers:
>net time /SETSNTP:{ipaddress}
4. Change the C:\WINNT\system32\drivers\etc\hosts and C:\WINNT\system32\drivers\etc\lmhosts on all servers.
5. Change NIC DB Replication client configuration on A-SRV (LC) servers:
>%_ENVISION%\database\cmd\set_mobilink_host.cmd {new_server_ip}
6. Restart all servers on the site.
Related Articles
Network settings 3Number of Views Change the IP Address of a Primary or Replica Instance in Amazon Web Services 38Number of Views Recover from an Incorrect IP Address Change 147Number of Views Cisco ASA authenticates to the RSA Authentication Manager 8.x primary but not to the replica 550Number of Views Verify an IP Address or Hostname 33Number of Views
Trending Articles
RSA Authentication Manager 8.9 Patches and Hotfixes Readme RSA MFA Agent 2.5 for Microsoft Windows Installation and Administration Guide RSA-2026-24: RSA Authentication Manager Security Update for Third-Party Component Vulnerabilities IDR SSO - Step 3: Deploy the Identity Router RSA Authentication Manager 8.9 Setup and Configuration Guide
Don't see what you're looking for?