Strides have been made in RSA NetWitness Platform v11.2 to provide an administrator alternatives to the standard proprietary NW database format. Now an admin can choose to have the raw packet database files written in PcapNg format allowing them to be directly accessible using third party tools like Wireshark.
To enable storing the raw packet data as PcapNg files, the setting packet.file.type in the network decoder database configuration node has to be changed from netwitness to pcapng. After making this change a restart of the service is not required unless you are too impatient for the existing database file (default size is 4GB) to roll-over.
Once the change is applied any new PCAPs uploaded or network traffic ingested into the decoder will be stored as pcapng files. Now as the database files age they are more readily available while on the decoder and when backed up off the system. In the below image you can see a mixture of the formats commingling in the packet database folder. The database written format can be changed between the two options without any loss of standard functionality.
There are some considerations before making the switch to PcapNg format over the default nwpdb format. The PcapNg format requires approximately 5% more storage when compared to the nwpdb format. The PcapNg format is not recommended to be used when ingest rates are greater than 8 Gbps on a single decoder as can introduce approximately 5% packet drops compared to when nwpdb is in use. The PcapNg files cannot be compressed while nwpdb files can, although in general raw network data typically does not compress well compared to raw logs. The PcapNg format is an open format while the nwpdb files are in a proprietary format so as accessibility improves, privacy concerns may arise when storing as PcapNg files. However, I am not suggesting security through obscurity is the right answer when measuring your GDPR compliance.
Hopefully this along with the already available SDK and APIs make NetWitness data more accessible.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.