Introduction

The instructions in this guide apply to physical hosts exclusively. See the Virtual Host Installation Guide for RSA NetWitness Platform 11.7 for instructions on how to set up virtual hosts in 11.7.

Note: Go to the Master Table of Contents to find all RSA NetWitness Platform 11.x documents.

Supported Hardware

Series 5, and Series 6.

Refer to the RSA NetWitness Hardware Setup Guides for detailed information on each series type (https://community.rsa.com/community/products/netwitness/hardware-setup-guides).

Endpoint Log Hybrid Host Hardware Specifications

Series 5 (RSA R730) hardware or Series 6 (RSA R740 hardware. See "(Optional) Task 2 - Install Endpoint Log Hybrid" in Post Installation Tasks for instructions on how to install the Endpoint Log Hybrid.

Note: If you have RSA NetWitness Endpoint 4.x hardware, you can re-purpose it for NetWitness Endpoint Log Hybrid 11.7.

RSA NetWitness UEBA Host Hardware Specifications

S5 (RSA R630 appliance) or S6 (RSA R640) hardware. See "(Optional) Task 3 - Install NetWitness UEBA" in Post Installation Tasks for instructions on how to install NetWitness UEBA.

SERIES 5 (RSA R630) SPECIFICATIONS

Specification Capacity
Model RSA PowerEdge R630xl
Processor Type Intel Xeon E5 -2680v3

Processor Speed

Cache

Number of Cores

Number of Processors

Number of Threads

2.5 GHz

30MB

12

2

24

Total Memory 256GB

Internal Disk Controller

RSA PERC H730

External Disk Controller RSA PERC H830

SAN Connectivity (HBA) - Optional

N/A

Remote Management Card iDRAC8 Enterprise

Drives

Total - 6 Drives

2 x 1TB, 2.5" HDD

4 x 2TB, 2.5" HDD

Chassis 1U

Weight

18.4 kg (40.5 lbs)

NIC Card*

On Board

2 x 10 Gb Copper

2 x 10 Gb & 2 x 1Gb Copper

(Other options are available)

Dimensions

H: 4.28 cm (1.68 in.) x

W: 48.23 cm (18.98 in.)

x 😧 75.51 cm (29.72 in.)

Power 1100W Redundant

BTU/hr

4100 BTU/hr (max)

Amps (Spec) 1100W / 220VAC = 5A

Actual Amp Draw (Post Startup)

2.1 Amps

Events Per Second (EPS) 100K EPS

Throughput

N/A

Note: Network Interface Controller (NIC) card options are available for swap with on-board daughter cards or add ons.

External Attached Storage

If you have external storage devices (for example, DACs or PowerVaults) attached to physical hosts, refer to the Hardware Setup Guides on RSA Link (https://community.rsa.com/community/products/netwitness/hardware-setup-guides) for information on how to configure this storage.

Physical Host Installation Workflow

The following diagram illustrates the NetWitness 11.7 Physical Host Installation workflow.

netwitness_freshinstallprocess.png

Self-Help Resources

There are several options that provide you with help as you need it for installing and using NetWitness:

Contact RSA Support

If you contact RSA Support, you should be at your computer. Be prepared to provide the following information:

  • The version number of the RSA NetWitness Platform product or application you are using.
  • The type of hardware you are using.

Use the following contact information if you have any questions or need assistance.

RSA Link

https://community.rsa.com

In the main menu, click My Cases.

International Contacts (How to Contact RSA Support) https://community.rsa.com/docs/DOC-1294
Community https://community.rsa.com/support