For disaster recovery, perform this procedure to install an RSA Authentication Manager 8.2 or later system image on an Intel version of the RSA SecurID Appliance 250 hardware appliance. The Intel version of the RSA SecurID Appliance 130 does not include an Intel Remote Management Module (RMM) for remote access.
You must have remote access to a supported Intel hardware appliance. You can only perform this procedure on the hardware appliance. This operation is not supported on the virtual appliance.
This operation restores the original settings on the hardware appliance. All data associated with the RSA Authentication Manager instance is permanently deleted, including log files, backup files, and configured settings, such as network settings.
Before you begin
Make sure that you have deployed an Intel Remote Management Module (RMM). For instructions, see "Configuring Remote Access to the RSA Authentication Manager Hardware Appliance" on RSA Link at https://community.rsa.com/docs/DOC-67160.
Download the rsa-am-hardware-appliance-188.8.131.52.0.iso or a later ISO file from https://my.rsa.com, and save the ISO file to a location that is accessible to the RMM.
(Optional) If the Operations Console is available for the primary or replica instance that is configured on the hardware appliance, you can download a text file that contains the current network settings:
On the primary or replica instance, log on to the Operations Console.