Webtier deployment internally placed
I need to migrate a webtier deployment to a newer OS and migrate it inside the firewall. What are the VM requirements and firewall requirements to place a webtier internally. This would be used only for token distribution, but a full list of ports would be appreciated for any future considerations.
- Auth Manager
- Authentication Manager
- Community Thread
- Forum Thread
- RSA Authentication Manager
- RSA SecurID
- RSA SecurID Access
A Webtier communicates to a Primary AM server on port 7022/tcp.
Users accessing a Webtier for CTKIP or SSC operations use whichever port you specify for the Webtier on the Primary Operations Console Virtual Host and Load Balancing page. If you do not change the port it will use 443/tcp.
|Hard Drive: 2 GB for web tier installation|
Hard Drive: 4 GB-20 GB free space for logs and updated component downloads
RAM: 4 GB
CPU: At least 2 virtual CPUs.
Webtier will open a few more tcp ports but these are all locally used and do not need to traverse the network.
The information provided by Edward Davis is correct. For additional information on the RSA Authentication Manager 8.5 web tier requirements and installation steps, please see RSA Authentication Manager 8.5 Setup and Configuration Guide. If you are on an earlier version, please our documentation for earlier versions of RSA Authentication Manager.