Anyone have made a authentication btw AP Meraki and AM 8.2 in radius mode ? i make the test but authentication not works because AM not supporte CHAP.
any workaround ?
Thanks for your help
According to Frank "the RADIUS guy" Miller here in Support:
The Meraki is using 802.1X (EAP) to authenticate users. The method requested is PEAP and MS-CHAPv2. MS-CHAPv2 is not supported by the AM 8.1 Radius server. The only inner EAP protocols supported by the AM 8.1 Radius server are RSA-EAP, RSA-OTP and EAP-GTC. The 2 RSA protocols were discontinued after windows 7. To use EAP-GTC you would have to find a supplicant that supports it.
A possible fix for this would be to use a Cisco ACS server as the radius server, with the AM 8.1 server configured as an external authentication server on the ACS. The ACS authenticating to the AM 8.1 server is a common configuration. You will need to contact Cisco for further information on integrating the Meraki gateway with the Cisco ACS.
Retrieving data ...