Trap OID for Netwitness Admin Server

Discussion created by rajbir singh on Sep 3, 2019
Latest reply on Oct 22, 2019 by rajbir singh

Like • Show 0 Likes0
Comment • 4

Dears,

Does anyone knows which trap OID we should use in legacy and global notification server settings for SNMP server.

I am getting snmp traps in my SNMP server which is IBM Tivoli also known as SCAPM, but these traps are not being identified by the IBM tivoli and the message we can see at SNMP server end, is below :

no rule found for enterprise ID .1.3.6.1.4.1.36.807.3.2

While rest of appliances are getting identified by the same SNMP server.

Below are the MIB files which has been applied on SNMP server to identify the traps:

NETWITNESS-IPMI-MIB.txt and NETWITNESS.txt.

Thanks in advance.

RSA Admin RSA Link Team David Waugh

Regards,

Rajbir

Outcomes

4 Replies

James Moon Sep 3, 2019 2:46 AM
Hi Rajbir,

Can you please confirm if the Trap OID under Administration-System-Legacy Notifications-SNMP Settings is set as 1.3.6.1.4.1.36807.1.8.1.0 not 1.3.6.1.4.1.36.807.3.2 or similar?
I think an extra "." has gotten into the OID.

36807 should be identified by NETWITNESS-MIB.txt.

Thanks,
James
Like • Show 0 Likes0
Actions
- rajbir singh @ James Moon on Sep 3, 2019 3:37 AM
  Dear James,
  
  Thanks for the quick response.
  
  It is configured as .1.3.6.1.4.1.36807.3.2
  
  please let me know if i can configure 1.3.6.1.4.1.36807.1.8.1.0 in trap OID so what about variables.
  
  Do i need to add anything?
  
  Please suggest, thanks in advance.
  
  Regards,
  Rajbir
  Like • Show 0 Likes0
  Actions
  - James Moon @ rajbir singh on Sep 3, 2019 8:06 PM
    Hi Rajbir,
    1.3.6.1.4.1.36807.1.8.1.0 is the default value for Trap OID in my lab though 1.3.6.1.4.1.36807.3.2 is also a valid OID.
    Have you confirmed if the trap with OID, .1.3.6.1.4.1.36.807.3.2, comes from the SA/Admin server? Is there any change this might be coming from another appliance?
    
    Thanks,
    James
    Like • Show 0 Likes0
    Actions
    - rajbir singh @ James Moon on Oct 22, 2019 2:17 AM
      Hi James,
      
      Thank you so much, for the support. And sorry for late reply.
      
      I found there was few lines which i had to # but i forget to do so it was not working, now i am getting traps without any issue.
      
      Really appreciated your efforts and support.
      
      Thanks,
      Like • Show 0 Likes0
      Actions

Trap OID for Netwitness Admin Server

Outcomes

Related Content

Recommended Content