Upgrade question: Upgrade from RSA Authentication manager 8.4.0.0 to RSA Authentication manager 8.4 Patch 6.
In a Primary and Replica virtual appliances deployment, what appliance should be upgraded first? the Primary or the Replica?
Appreciate your help
I've moved your question to the RSA SecurID Access space where it will be seen by the product's support engineers, other customers and partners. Please bookmark this page and use it when you have product-specific questions.
Alternatively, from the RSA Support page, click on Ask A Question on the blue navigation bar and choose Ask A Product Related Question. From there, scroll to RSA SecurID Access and click Ask A Question. That way your question will appear in the correct space.
+ + +
To answer your question, wIth RSA Authentication Manager, you always want to update the primary first then your replicas, completing the upgrade on each one before moving to the next.
Regards,
Erica
Thanks for your help Erica. Great support.
Here's a 10 minute video on what Erica summarized about patching the Primary 1st, then one replica at a time same patch or Service Pack or update until all replicas are done, then back to the Primary is you need to apply another update.
000029877 - How to install patches on an RSA Authentication Manager 8.1 via web browser
What ramifications, if any, are there to upgrading a replica first. In my case, I have the primary (rsa01), and 2 replicas, (rsa02, and rsa03). All three are on 8.4, and 01/02 are running the same patch versions. 03 was newly installed in preparation for a migration, and was upgraded to the newest patch. It has been attached to the primary and seems to not be causing any problems to the environment. If I start upgrading 01/02, am I going to run into problems?
Cesar Mayorga,
I've moved your question to the RSA SecurID Access space where it will be seen by the product's support engineers, other customers and partners. Please bookmark this page and use it when you have product-specific questions.
Alternatively, from the RSA Support page, click on Ask A Question on the blue navigation bar and choose Ask A Product Related Question. From there, scroll to RSA SecurID Access and click Ask A Question. That way your question will appear in the correct space.
+ + +
To answer your question, wIth RSA Authentication Manager, you always want to update the primary first then your replicas, completing the upgrade on each one before moving to the next.
Regards,
Erica