Hi, i'm trying to configure the SNMP in our RSA authentication manager 8.3 but we don't have a v3 SNMP yet.
Is there a way we can do it for lower version like v2 SNMP? If yes, how can we do it?
Hi, i'm trying to configure the SNMP in our RSA authentication manager 8.3 but we don't have a v3 SNMP yet.
Is there a way we can do it for lower version like v2 SNMP? If yes, how can we do it?
I've moved your question to the RSA SecurID Access space where it will be seen by the product's support engineers, other customers and partners. Please bookmark this page and use it when you have product-specific questions.
Alternatively, from the RSA Customer Support page, click on Ask A Question on the blue navigation bar and choose Ask A Product Related Question. From there, scroll to RSA SecurID Access and click Ask A Question. That way your question will appear in the correct space.
Regards,
Erica
We do not have a procedure to set snmpv3 to snmpv2.
snmpv3 must be used.
Thanks for the response.
I'm trying to configure the SNMP in RSA authentication manager and there are some fields that i'm not familiar..
If you could shed a light on the ff: fields that would be great.
Security Name = can you advise what is the security name we should configure here? is it a local user name defined? is the 'snmpuser' a default user?
Authentication Password = Is something we set? Or has already been provided?
Authentication Protocol = Which one is recommended option? Is it MD5 or SHA? What is the difference?
Privacy Protocol = Which one is recommended option? Is it DES or AES? What is the difference?
Thanks,
In the Security Console these are things you set, so authenticated and encrypted snmpv3 communication can happen.
https://www.ietf.org/rfc/rfc2571.txt
There are many tutorials and explanations about snmpv3 on various sites on the internet.
We do not have a procedure to set snmpv3 to snmpv2.
snmpv3 must be used.