Please help to check the HW configuration of RSA physical device as well as current CPU and Memory utilization.
Please help to check the HW configuration of RSA physical device as well as current CPU and Memory utilization.
If you want to do long term monitoring these snmp OID's can be polled
memory free and swap free
.1.3.6.1.4.1.2021.4.6.0&.1.3.6.1.4.1.2021.4.4.0
cpu load
1.3.6.1.4.1.2021.10.1.5.1&1.3.6.1.4.1.2021.10.1.5.2
see this thread
Memory/CPU logs for RSA Authentication Manager 8.2 SP1 patch 8
I would note that the RDBMS system will utilize almost all available RAM for operation. RSA Authentication Manager appliances typically run at about 97% memory consumption on a continuous basis.
Mohammad Usaid,
Welcome to the RSA Link community!
I moved your question to the RSA SecurID Access space where it will be seen by the product's support engineers, other customers and partners. Please bookmark this page and use it when you have product-specific questions.
Alternatively, from the RSA Customer Support page, click on Ask A Question on the blue navigation bar and choose Ask A Product Related Question. From there, scroll to RSA SecurID Access and click Ask A Question. That way your question will appear in the correct space.
* * *
I see you opened a support case for your issue and the TSE asked you to provide the following information from the primary RSA Authentication Manager server:
df -h
free -m
Please reply to him at your earliest convenience.
Regards,
Erica