Announcements

SecurID® Integrations

Bottomline WebSeries 7.6 - RSA Ready SecurID Access Implementation Guide

Certified: August 26, 2019

 

Solution Summary

This section describes the way in which Bottomline WebSeries can integrate with RSA SecurID Access.

Use Case

When integrated, users must authenticate with RSA SecurID Access in order to sign into Bottomline WebSeries. User sign-in can be integrated with RSA SecurID Access using SecurID Authentication API.

 

Integration Type

SecurID Authentication API integrations can provide a rich user interface with all RSA SecurID Access features within the partner application. Refer to the Supported Features section in this guide see which features this partner application has implemented.

Supported Features

This section shows all of the supported features by integration type and by RSA SecurID Access component. Use this information to determine which integration type and which RSA SecurID Access component your deployment will use. The next section contains the steps to integrate RSA SecurID Access with Bottomline WebSeries for each integration type.

 

Bottomline WebSeries Integration with RSA Cloud Authentication Service

Authentication Methods

Authentication API

RADIUS

Relying Party

SSO Agent

RSA SecurID----
LDAP Password----
Authenticate Approve---
Authenticate Tokencode---
Device Biometrics----
SMS Tokencode----
Voice Tokencode----
FIDO Tokenn/an/a--

 

Bottomline WebSeries Integration with RSA Authentication Manager

Authentication Methods

Authentication API

RADIUSAuthentication Agent
RSA SecurID--
On-Demand Authentication--
Risk-Based Authenticationn/a--

 

Supported
- Not supported
n/tNot yet tested or documented, but may be possible.

Configuration Summary

This document is not intended to suggest optimum installations or configurations. It assumes the reader has both working knowledge of all products involved, and the ability to perform the tasks outlined in this section. Administrators should have access to the product documentation for all products in order to install the required components. All RSA SecurID Access and Bottomline WebSeries components must be installed and working prior to the integration.

 

This section describes how to integrate Bottomline WebSeries with RSA Authentication Manager using SecurID Authentication API.

Architecture Diagram

arch-diag-rest-am_624x403.png

Configure RSA Authentication Manager

To configure the integration with RSA Authentication Manager, you must enable the REST Service and then create an authentication agent.

Sign into the Security Console and browse to Setup > System Settings > REST Service, mark the check box to enable REST Service and make note of the Agent Credentials. The Agent Credentials will be needed during configuration of the agent.

Browse to Access > Authentication Agents and click Add New. Enter the name of your authentication agent in the Hostname field and click Save.

 

Configure Bottomline WebSeries

Perform these steps to configure Bottomline WebSeries as an authentication API client to RSA Authentication Manager.

In WebSeries database in CONFIGPARAMS table add the following data:

PARAMETERVALUEOWNER
rsa.mfa.enabledtrue/falsePRODUCT
rsa.agent.hostname<hostname of Authentication Agent added in RSA Security Console>PRODUCT

 

In RSA_HOST table, add RSA Authentication Manager servers:

HOST_URLACCESS_KEYPRIORITY
https://replica1.com:5555/mfa/v1_1<enter Access Key from RSA Security Console>1
https://replica2.com:5555/mfa/v1_1<enter Access Key from RSA Security Console>2
https://replica3.com:5555/mfa/v1_1<enter Access Key from RSA Security Console>3

 

End User Experience

Login screen

image-1.png

User-defined new PIN

image-2.png

System-generated new PIN

image-3.png

Next tokencode

image-4.png

 

 

Certification Details

Date of testing: August 23, 2019

RSA Authentication Manager 8.4

Bottomline WebSeries J 7.6.8C

 

Known Issues

No known issues.


Labels (1)
No ratings
Version history
Last update:
‎2019-08-30 08:11 AM
Updated by:
Contributors
Article Dashboard