Via L&G Hard Appliance Dell R320 oracle installer error while upgrading from 6.0.2 to v7.0
Originally Published: 2015-09-11
Article Number
Applies To
RSA Product/Service Type: Appliance
RSA Version/Condition: 7.0
Platform: Linux
Platform (Other): null
O/S Version: Red Hat Enterprise Linux 5.x
Product Name: RSA-0018000
Product Description: Access Certification Manager
Issue
Oracle Installer Exit Code: 253
Duplicated /tmp/OraInstall2015-09-02_11-58-45AM/installActions2015-09-02_11-58-45AM.log in /tmp/aveksa/oracle.log
Below error message was logged in the oracle.log file.
PluggableTask(CHECK_ZEROCONF):zeroconf check[CHECK_ZEROCONF]:TASK_SUMMARY:FAILED:IGNORABLE:VERIFICATION_FAILED
ERRORMSG(aveksaqa): PRVE-10077 : NOZEROCONF parameter was not specified or was not set to 'yes' in file "/etc/sysconfig/network" on node "aveksaqa.chicago.cme.com"
The error above is misleading and doesn't reflect the root cause of the problem. NOZEROCONF is a parameter returns a boolean value of Yes, or No if the server or workstation networking should be configured or not. By default this value is set to Yes. In this case the value was set to Yes by default, however, the gateway device, such as eth0 (ifcfg-bond0) hard appliance was configured for multiple interfaces on the same subnet, and required one of those interfaces to be the preferred route to the default gateway.
Resolution
In order to resolve this issue I modified 3 files.
1. Made below modification to the network file located in /etc/sysconfig/
a. Corrected the Gateway IP address
b. Typed the fully Qualified Domain Name.
2. Modified the subnet, and Gateway IP addresses in the resolv.conf file.
3. Modified the hosts file to translate the localhost to a hostname for an IPv4 address in the loopback IPv6 which is usually 127.0.0.1 or ::1
Related Articles
Appliance console shows "[DEPEND] Dependency failed for xxx" and "[ TIME ] Timed out waiting for device xxx" when booting … Number of Views RSA SecurID® Hardware Appliance 230 (Dell R240) Hardware issue. How to apply Bios fix Number of Views RSA Authentication Manager 8.2 upgrade applied to Dell R710 hardware and reboot not completing Number of Views Unable to recognize a USB port on RSA SecurID hardware appliance A130/R230 and A250/R630 Number of Views Updating RSA Via Lifecycle & Governance Appliance Firmware (Dell R620 or R720) Number of Views
Trending Articles
Passwordless Authentication in Windows MFA Agent for Active Directory – Quick Setup Guide RSA Authentication Manager 8.9 Release Notes (January 2026) RSA Authentication Manager Upgrade Process RSA Authentication Manager 8.7 SP2 Setup and Configuration Guide An example of SSO using SAML and ADFS with RSA Identity Management and Governance 6.9.x
Don't see what you're looking for?
