Steps to configure RRM to work with Virtual Host

Steps to be followed in Windows:

1.       Go to Control Panel and open Network Connections.

2.       Right click on the active connection and click Properties.

3.       On the Local Area Connection Properties dialog box select the Internet Protocol and then click Properties button.

4.       On the Internet Protocol (TCP/IP) Properties dialog box, click Advanced button.

5.       Under IP Settings tab inside IP addresses group box add the IP address which you want to use as local host. (Ex: 192.168.2.231)

Note: Before adding verify whether the IP address is used by another machine.

Steps to be followed in RRM Installation:

1.       Stop all RRM Services.

2.       Go to httpd.conf file in <Installation Location>/webserver/conf folder.

3.       In this file under 

###############################################

###  RSA Renewal Server configuration  ###

###############################################

Replace the lines below

Listen <Renewal port number>

<VirtualHost _default_:< Renewal port number>>

With

Listen 192.168.2.231:443

<VirtualHost <Virtual IP>:<Enrollment port >>

NameVirtualHost <Virtual IP>:<Enrollment port >

4.       Also change under 

###############################################

###  RSA Enrollment Server configuration  ###

###############################################

Replace the lines below

Listen < Enrollment port number>

<VirtualHost _default_:< Enrollment port number>>

With

Listen <Current machine IP Address>:< Enrollment port number >

<VirtualHost <Current machine IP Address>:< Enrollment port number >>

NameVirtualHost <Current machine IP Address>:< Enrollment port number >

5.       Save the File. Go to <Installation Location>/webserver/enroll-server folder.

6.       Open domain-main.xuda. Go to line 264 and replace line below

<A HREF="https://<computername>:448/auto-renew-certificate.xuda?domainID=[domainID]" onClick="displayWarning('renew');" STYLE="content:'TAFID:lnkRenewClientCert'">Renew your client certificate</A>

With

<A HREF="https:// <Virtual IP>:<Enrollment port >/auto-renew-certificate.xuda?domainID=[domainID]" onClick="displayWarning('renew');" STYLE="content:'TAFID:lnkRenewClientCert'">Renew your client certificate</A>

7.       Start the RRM services.

See solution How to set certificate renewal URLfor information about changing renewal email link