The following table lists the MIB objects for the available agent protocol service.
The following table lists the MIB objects for the available agent protocol service.
amApsPacketsTotal | .1.3.6.1.4.1.2197.30.1.1 | Total number of legacy (UDP) packets sent and received. |
amApsPacketsPerSec | .1.3.6.1.4.1.2197.30.1.2 | Average number of packets sent and received per second. |
amApsAuthReqsTotal | .1.3.6.1.4.1.2197.30.1.3 | Total number of legacy (UDP) requests. |
amApsAuthReqPerSec | .1.3.6.1.4.1.2197.30.1.4 | Average number of authentication requests received per second. |
amApsAuthFailTotal | .1.3.6.1.4.1.2197.30.1.5 | Total number of authentication requests that were unsuccessful. |
amApsAuthFailPerSec | .1.3.6.1.4.1.2197.30.1.6 | Average number of authentication request failures per second. |
amApsAuthOkTotal | .1.3.6.1.4.1.2197.30.1.7 | Total number of authentication requests that succeeded. |
amApsAuthOkPerSec | .1.3.6.1.4.1.2197.30.1.8 | Average number of successful authentication requests per second. |
amApsNewPinTotal | .1.3.6.1.4.1.2197.30.1.9 | Total number of new PIN authentications processed. |
amApsNextTokencodeTotal | .1.3.6.1.4.1.2197.30.1.10 | Total number of next tokencode authentications processed. |
amApsTransactionQueue Capacity | .1.3.6.1.4.1.2197.30.1.11 | This value is for use by RSA. It is intended for diagnostic and troubleshooting purposes only. Capacity of the queue that holds transactions that were processed, but not yet committed. |
amApsAuthThreads | .1.3.6.1.4.1.2197.30.1.12 | This value is for use by RSA. It is intended for diagnostic and troubleshooting purposes only. Total number of threads available to process authentications through the authentication broker. |
amApsDupPacketSet Capacity | .1.3.6.1.4.1.2197.30.1.13 | This value is for use by RSA. It is intended for diagnostic and troubleshooting purposes only. Capacity of the set of packets that the APS holds to respond to previous responses requests. |
amApsDupPacketReqsTotal | .1.3.6.1.4.1.2197.30.1.14 | This value is for use by RSA. It is intended for diagnostic and troubleshooting purposes only. Total number of duplicate responses the APS sent due to UDP packet transmission errors. |
amApsAuthRoundTripMax TimeMS | .1.3.6.1.4.1.2197.30.1.15 | This value is for use by RSA. It is intended for diagnostic and troubleshooting purposes only. Maximum time to send or receive an authentication request or response. |
amApsAuthRoundTripMin TimeMS | .1.3.6.1.4.1.2197.30.1.16 | This value is for use by RSA. It is intended for diagnostic and troubleshooting purposes only. Maximum time to send or receive an authentication request or response. |
amApsAuthRoundTripAvg TimeMS | .1.3.6.1.4.1.2197.30.1.17 | This value is for use by RSA. It is intended for diagnostic and troubleshooting purposes only. Average time to send or receive an authentication request or response. |
amApsRateSampleTimeS | .1.3.6.1.4.1.2197.30.1.18 | Interval over which all rate-based values are sampled, in seconds. |
amApsPacketProcAbort ExceptionTotal | .1.3.6.1.4.1.2197.30.1.19 | Total number of requests for which the APS aborted handling due to packet processing exceptions. |
amApsPacketProcAbort AgentNotFoundTotal | .1.3.6.1.4.1.2197.30.1.20 | Total number of requests for which the APS aborted handling because the sending agent was not found. |
You are here
Table of Contents > SNMP > Management Information Base Objects for SNMP GETS > MIB Objects for Agent Protocol Service