Management Information Base Objects for SNMP for the Hardware Appliance
The following table lists the hardware appliance MIB objects.
RSA Authentication Manager includes Management Information Base (MIB) files that you can use to monitor the appliance hardware. You can download the appliance MIB files from the Security Console. For more information on configuring SNMP for Authentication Manager and downloading MIB files, see Configure SNMP.
Authentication Manager supports hardware trap generation for SNMP v3. Authentication Manager does not support hardware trap generation through SNMPv1 or SNMPv2.
The hardware appliance MIB files contain MIB objects that you can use for GETS, to collect aggregate and real-time performance data for the hardware appliance. You can view these objects and their corresponding statistics in a MIB browser. To view the details of the MIB objects, you must download a MIB browser.
Dell Hardware Appliance MIB Files
The following table describes the Dell hardware appliance MIB files provided with Authentication Manager.
Information about the systems monitored by Server Administrator instrumentation software. The 10892.mib is the primary MIB for the PowerEdge systems.
Information about the remote access components monitored by the Server Administrator Remote Access Service.
Information about the storage hardware components and RAID configurations monitored by Server Administrator.
Information related to the remote access card.
Information about the components monitored by the remote access out-of-band software agent.
Information about the SNMP data, and traps, supported by the iDRAC7. This MIB file is written in "SMv2" notation/format.
Defines traps forwarded by Dell OpenManage Essentials (OME), as well as internally generated alerts based on health and power monitoring.
The QLogic Advanced Server Configuration MIB defines the LoadBalance/VLAN configuration Management Information Base.
These objects are part of the enterprise MIB for QLogic Advanced Server.
The QLogic Advanced Server Statistics MIB defines the Load Balance/VLAN Statistics Management Information Base.
These objects are part of the enterprise MIB for Broadcom Advanced Server.
The QLogic Advanced Server Trap MIB provides information about the QLogic adapter.
The QLogic NetXtreme Network Adapter Extended Information MIB defines the QLogic NetXtreme Adapter Extended Information Set.
These objects are part of the enterprise MIB for QLogic server and workstation network adapters.
To view the contents of these MIB files, you must download a MIB browser.
Intel Hardware Appliance MIB Files
The Intel hardware appliance includes two MIB files. The basebrd5_v1.mib file supports SNMP v1 or later, and the basebrd7_v5.mib file supports SNMP v2 or later. Either MIB file can be used for SNMP monitoring because Authentication Manager supports SNMP v3. Authentication Manager does not support hardware trap generation through SNMPv1 or SNMPv2.
Each hardware appliance MIB file supports traps and GETS for the following components:
System Fan (includes redundancy)
Power Supply (includes redundancy)
PCI Hot Plug Events
The hardware appliance MIB files contain MIB objects that you can use for GETS, to collect aggregate and real-time performance data for the hardware appliance. You can view these objects and their corresponding statistics in a MIB browser. To view the details of basebrd5_v1.mib and basebrd7_v5.mib, you must download a MIB browser.