RSA Authentication Manager 8.2 hardware appliance fails to reboot when patch or upgrade is applied
Originally Published: 2018-01-18
Last Modified: 2022-06-20
Article Number
Applies To
RSA Product/Service Type: Authentication Manager
RSA Version/Condition: 8.2.1
Platform: Hardware Appliance only
Issue
The problem arises if a customer with RSA Authentication Manager 8.2 SP1 applies a recent patch then uninstalls that patch and goes back and installs patch that is older than the recent patch that was previously applied. After installing the older patch, the system might not boot.
After installing a patch or upgrade which includes a update to the OS kernel, the system may fail to boot properly and report a message on the appliance system console immediately after the boot attempt, such as:
kernel (hd0.0)/boot/vmlinuz-3.0.1.1-108.18-default root=/dev/sda1 disk=/dev/saa vga-0x314 quiet Error 15: File not found Press any key to continue...
Cause
Resolution
To complete this task,
- In the system boot, select the first item; that is, the normal boot and enter e to edit.
- There are two commands. Edit them both starting with the first. Highlight the line and enter e to edit.
- Move the text cursor back to the right of the -default string at the end of the kernel version and use the backspace key to delete the text which follows the version text. In the screen shots here, that would be 3.0.101-.
- Press the Tab key which should auto-complete the reference to the kernel correctly.
- Press the Enter key to save the updated line and return to the previous screen, then use the down arrow to highlight the next line.
- Edit this line in the same manner as the first. Again, finish with the Enter key to save.
- Press the up arrow to get to the first line then press b to boot with the updated bootstrap data.
Workaround
Notes
Related Articles
RSA SecurID Intel based hardware appliance redirected to BIOS after a reboot 215Number of Views Cannot log on to Microsoft Windows 8.1 with RSA Authentication Agent 7.3.x for Windows after Windows update is applied usi… 58Number of Views Business descriptions are applied incorrectly when using a wildcard with an underscore in RSA Identity Governance and Life… 19Number of Views Is there a maximum number of RAs that can be assigned to the same KCA installation? 3Number of Views Identity router status changed to distressed after reboot in RSA SecurID Access 158Number of Views
Trending Articles
RSA Authentication Manager 8.9 Patches and Hotfixes Readme RSA MFA Agent 2.5 for Microsoft Windows Installation and Administration Guide RSA-2026-24: RSA Authentication Manager Security Update for Third-Party Component Vulnerabilities IDR SSO - Step 3: Deploy the Identity Router RSA Authentication Manager 8.9 Setup and Configuration Guide
Don't see what you're looking for?